Piezo-Mate Scaler/Polisher with LED Piezo Scaler Handpiece

Engler has incorporated the State of the Art microchip circuitry into a new highly efficient multi operational unit, the Piezo-Mate. At the touch of the switch you can alternate from scaling to polishing plus a variety of other operations. Piezo-Mate is autotuned. By constantly scanning and compensating, the oscillation is maintained at optimum frequency when pressure is applied to the tip, eliminating even partial loss of power. You can perform curettage, deep scaling of heavy calculus and stains and conclude the prophylaxis treatment to polish and smooth the teeth all in one operation.

here are 8 different tips available for the Piezo-Mate. Our stainless steel, heat treated tips glide smoothly across the tooth surface. The WATER FLOWS INTERNALLY THROUGH THE TIP - DIRECTLY TO THE OPERATIVE SITE, gently cooling and lubricating the tooth and washing away the dislodged debris.

At the touch of the foot control, the tip is powered instantly without stalling. Even after the foot control is released, the scaler's delayed cavitation feature disperses the excess water into a fine mist, thereby eliminating annoying "after drip".

The high speed (35,000 RPM) and torque of the micromotor is used for cutting, drilling, sectioning, and many other procedures, lower speed polishing completes the dental prophylaxis.

Scaler:

Autoclavable scaler handpiece
Handpiece with LED light with light guide also available
3 Assorted Tips
Tip wrench
Water line with inline water filter and quick disconnect attached
One foot control for both scaling and polishing mode

Polisher:

200 to 35,000 RPM variable speed micromotor, precision balanced for low vibration/low noise
High torque micromotor
Forward / reverse switch
Straight handpiece, user friendly, autoclavable
Prophy angle with snap on rubber cups, autoclavable
Starter kit with 10 rubber cups and 10 prophy paste cups
Rubber rest for micromotor

Micromotor options:

Reduction Handpieces
Friction Grip and Latch Type Contra Angles fit micromotor or straight handpieces
Diamond (7) and Carbide(6) bur kits 1.6 mm
Diamond Cutting Disc with mandrel 2.35 mm

Water connection options: (one is required):

Water bottle with female quick disconnect
Saddle valve with female quick disconnect
Faucet diverter with female quick disconnect

Technical Data:

Water input pressure: 30-60 PSI (2-5 Bar)
Power Supply: 110 or 220 VAC 50 / 60 Hz
Operating Frequency: 27,500- 31,000 Hz, for scaling mode, Autotuned.
Dimensions: Width 7 ½”, Length 9 ½”, Height 3 ¼” / 19.0 cm x 24.1 cm x 8.3 cm Net Weight: 9 ¾ Lbs / 4.4 Kg.
Shipping Weight: 11 Lbs / 4.93 Kg.